This is the latest recevied telemetry packets stored in our database for station/object DO7BTR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786733055 | 28.4 deg C | 47.8 % | 1012.1 hPa | 0 | 0 |
| 1786732157 | 29 deg C | 46.5 % | 1012.1 hPa | 0 | 0 |
| 1786729455 | 30.7 deg C | 41.6 % | 1012.1 hPa | 0 | 0 |
| 1786728558 | 31.2 deg C | 40.6 % | 1012.2 hPa | 0 | 0 |
| 1786727655 | 32 deg C | 44.3 % | 1012.2 hPa | 0 | 0 |
| 1786726760 | 32.5 deg C | 44 % | 1012.2 hPa | 0 | 0 |
| 1786725853 | 32.5 deg C | 42.5 % | 1012.3 hPa | 0 | 0 |
| 1786724939 | 32.8 deg C | 42.4 % | 1012.4 hPa | 0 | 0 |
| 1786724042 | 33 deg C | 40.1 % | 1012.4 hPa | 0 | 0 |
| 1786723137 | 33.2 deg C | 37.2 % | 1012.4 hPa | 0 | 0 |
| 1786722232 | 33.6 deg C | 36.7 % | 1012.5 hPa | 0 | 0 |
| 1786720431 | 34.2 deg C | 37.6 % | 1012.7 hPa | 0 | 0 |
| 1786719531 | 34.6 deg C | 37.4 % | 1012.8 hPa | 0 | 0 |
| 1786718636 | 34.8 deg C | 37.7 % | 1012.8 hPa | 0 | 0 |
| 1786717731 | 34.8 deg C | 38.4 % | 1012.9 hPa | 0 | 0 |
| 1786716833 | 35 deg C | 40.3 % | 1013 hPa | 0 | 0 |
| 1786715929 | 34.9 deg C | 39.7 % | 1013.2 hPa | 0 | 0 |
| 1786715027 | 35 deg C | 37.8 % | 1013.2 hPa | 0 | 0 |
| 1786714123 | 35.2 deg C | 37.6 % | 1013.2 hPa | 0 | 0 |
| 1786713228 | 34.9 deg C | 38.3 % | 1013.3 hPa | 0 | 0 |
| 1786712331 | 34.2 deg C | 40.4 % | 1013.4 hPa | 0 | 0 |
| 1786711427 | 33.9 deg C | 39.6 % | 1013.6 hPa | 0 | 0 |
| 1786710522 | 33.8 deg C | 39.9 % | 1013.7 hPa | 0 | 0 |
| 1786709621 | 33.6 deg C | 41.4 % | 1013.8 hPa | 0 | 0 |
| 1786708718 | 33.7 deg C | 39.7 % | 1014 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)