This is the latest recevied telemetry packets stored in our database for station/object KK7LLM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754192942 | 438 Volts | 635 Deg.F | 307 | 0 | 0 |
| 1754192730 | 445 Volts | 635 Deg.F | 309 | 0 | 0 |
| 1754192587 | 455 Volts | 637 Deg.F | 562 | 0 | 0 |
| 1754192388 | 447 Volts | 634 Deg.F | 311 | 0 | 0 |
| 1754192108 | 449 Volts | 633 Deg.F | 301 | 0 | 0 |
| 1754192062 | 450 Volts | 631 Deg.F | 301 | 0 | 0 |
| 1754192041 | 447 Volts | 631 Deg.F | 296 | 0 | 0 |
| 1754191986 | 447 Volts | 629 Deg.F | 296 | 0 | 0 |
| 1754191931 | 445 Volts | 628 Deg.F | 311 | 0 | 0 |
| 1754191924 | 445 Volts | 628 Deg.F | 325 | 0 | 0 |
| 1754191897 | 441 Volts | 628 Deg.F | 322 | 0 | 0 |
| 1754191597 | 446 Volts | 625 Deg.F | 323 | 0 | 0 |
| 1754191297 | 450 Volts | 620 Deg.F | 586 | 0 | 0 |
| 1754188273 | 447 Volts | 647 Deg.F | 263 | 0 | 0 |
| 1754188266 | 447 Volts | 647 Deg.F | 267 | 0 | 0 |
| 1754188256 | 399 Volts | 647 Deg.F | 280 | 0 | 0 |
| 1754188250 | 443 Volts | 647 Deg.F | 272 | 0 | 0 |
| 1754188224 | 444 Volts | 646 Deg.F | 272 | 0 | 0 |
| 1754188218 | 446 Volts | 646 Deg.F | 277 | 0 | 0 |
| 1754188211 | 446 Volts | 646 Deg.F | 278 | 0 | 0 |
| 1754188077 | 451 Volts | 645 Deg.F | 277 | 0 | 0 |
| 1754188065 | 448 Volts | 645 Deg.F | 296 | 0 | 0 |
| 1754187909 | 446 Volts | 646 Deg.F | 291 | 0 | 0 |
| 1754187782 | 451 Volts | 645 Deg.F | 289 | 0 | 0 |
| 1754187565 | 448 Volts | 644 Deg.F | 285 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)