APRS Track Direct

My position About ☰

reset

HP1PCS-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1PCS-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1754309973	13.28 Volt	160 Pkt	100 Pkt	79 Pcnt
1754309372	13.28 Volt	160 Pkt	100 Pkt	80 Pcnt
1754308772	13.28 Volt	160 Pkt	100 Pkt	79 Pcnt
1754308171	13.28 Volt	160 Pkt	90 Pkt	78 Pcnt
1754307571	13.28 Volt	160 Pkt	90 Pkt	78 Pcnt
1754306970	13.28 Volt	150 Pkt	90 Pkt	80 Pcnt
1754306370	13.28 Volt	150 Pkt	80 Pkt	78 Pcnt
1754305769	13.28 Volt	150 Pkt	90 Pkt	76 Pcnt
1754305170	13.28 Volt	150 Pkt	90 Pkt	79 Pcnt
1754304568	13.28 Volt	150 Pkt	90 Pkt	79 Pcnt
1754303967	13.28 Volt	150 Pkt	90 Pkt	78 Pcnt
1754303367	13.28 Volt	150 Pkt	90 Pkt	77 Pcnt
1754302766	13.28 Volt	160 Pkt	90 Pkt	75 Pcnt
1754302166	13.28 Volt	150 Pkt	90 Pkt	75 Pcnt
1754301565	13.28 Volt	150 Pkt	90 Pkt	73 Pcnt
1754300964	13.28 Volt	150 Pkt	90 Pkt	73 Pcnt
1754300364	13.28 Volt	150 Pkt	90 Pkt	72 Pcnt
1754299763	13.28 Volt	150 Pkt	90 Pkt	70 Pcnt
1754299163	13.28 Volt	150 Pkt	90 Pkt	72 Pcnt
1754298562	13.28 Volt	150 Pkt	90 Pkt	74 Pcnt
1754297962	13.28 Volt	150 Pkt	90 Pkt	76 Pcnt
1754297362	13.28 Volt	140 Pkt	90 Pkt	76 Pcnt
1754296760	13.28 Volt	140 Pkt	90 Pkt	76 Pcnt
1754296160	13.28 Volt	150 Pkt	90 Pkt	76 Pcnt
1754295559	13.28 Volt	150 Pkt	90 Pkt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)