APRS Track Direct

My position About ☰

reset

AE4BA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AE4BA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1758174063	0.05 Load	27.8 DegC	1070 Mb	2008 Pkt	464 Pkt
1758173762	0.07 Load	27.8 DegC	1065 Mb	1970 Pkt	463 Pkt
1758173463	0.06 Load	27.8 DegC	1062 Mb	1889 Pkt	483 Pkt
1758173162	0.06 Load	27.8 DegC	1083 Mb	1931 Pkt	515 Pkt
1758172863	0.1 Load	27.8 DegC	1069 Mb	1936 Pkt	456 Pkt
1758172562	0.05 Load	27.8 DegC	1074 Mb	1813 Pkt	477 Pkt
1758172262	0.08 Load	27.8 DegC	1073 Mb	1952 Pkt	458 Pkt
1758171963	0.07 Load	27.8 DegC	1065 Mb	2014 Pkt	466 Pkt
1758171662	0.07 Load	27.8 DegC	1062 Mb	1355 Pkt	491 Pkt
1758171363	0.09 Load	27.8 DegC	1080 Mb	2167 Pkt	509 Pkt
1758171062	0.14 Load	27.8 DegC	1067 Mb	2857 Pkt	468 Pkt
1758170763	0.23 Load	27.8 DegC	1053 Mb	3165 Pkt	1136 Pkt
1758170462	0.23 Load	27.8 DegC	1075 Mb	2079 Pkt	465 Pkt
1758170162	0.27 Load	27.8 DegC	1078 Mb	2337 Pkt	578 Pkt
1758169863	0.21 Load	27.8 DegC	135 Mb	102349 Pkt	10523 Pkt
1758169562	0.14 Load	27.8 DegC	894 Mb	2042 Pkt	522 Pkt
1758169263	0.15 Load	27.8 DegC	898 Mb	2061 Pkt	486 Pkt
1758168962	0.17 Load	27.8 DegC	896 Mb	1987 Pkt	475 Pkt
1758168663	0.18 Load	27.8 DegC	909 Mb	1994 Pkt	454 Pkt
1758168363	0.18 Load	27.8 DegC	895 Mb	1894 Pkt	459 Pkt
1758168062	0.19 Load	27.8 DegC	900 Mb	2382 Pkt	730 Pkt
1758167763	0.19 Load	27.8 DegC	897 Mb	1998 Pkt	506 Pkt
1758167462	0.22 Load	27.8 DegC	896 Mb	1794 Pkt	457 Pkt
1758167163	0.27 Load	27.8 DegC	890 Mb	2012 Pkt	482 Pkt
1758166862	0.2 Load	27.8 DegC	908 Mb	2019 Pkt	463 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)