This is the latest recevied telemetry packets stored in our database for station/object YD6HRD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | BATT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790649669 | -51 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790649369 | -46 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790648769 | -50 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790647869 | -57 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790647569 | -51 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790647269 | -52 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790645469 | -52 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790645169 | -52 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790644269 | -52 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790643369 | -48 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790643069 | -54 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790641569 | -50 dBm | 0.02 Volt | 0 | 0 | 0 |
| 1790641269 | -52 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790640069 | -52 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790639469 | -52 dBm | 0.02 Volt | 0 | 0 | 0 |
| 1790638869 | -48 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790638569 | -52 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790638269 | -51 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790637669 | -49 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790637369 | -47 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790637069 | -54 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790636769 | -53 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790636169 | -55 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790635869 | -48 dBm | 0.03 Volt | 0 | 0 | 0 |
| 1790635269 | -52 dBm | 0.03 Volt | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
BATT: 0, 0.001, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)