APRS Track Direct

My position About ☰

reset

E27ASY-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E27ASY-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1732210241	21 ug/m3	30 ug/m3	33 ug/m3	-66 dBm	13.04 V
1732209919	20 ug/m3	30 ug/m3	34 ug/m3	-66 dBm	12.98 V
1732209596	19 ug/m3	27 ug/m3	28 ug/m3	-66 dBm	13.04 V
1732209274	20 ug/m3	28 ug/m3	31 ug/m3	-67 dBm	13 V
1732208952	20 ug/m3	28 ug/m3	31 ug/m3	-67 dBm	13.04 V
1732208630	20 ug/m3	27 ug/m3	31 ug/m3	-66 dBm	13 V
1732208308	21 ug/m3	30 ug/m3	32 ug/m3	-66 dBm	13.04 V
1732207985	21 ug/m3	29 ug/m3	31 ug/m3	-67 dBm	13.04 V
1732207663	20 ug/m3	29 ug/m3	31 ug/m3	-67 dBm	13.06 V
1732207341	19 ug/m3	28 ug/m3	32 ug/m3	-66 dBm	13.04 V
1732207018	21 ug/m3	29 ug/m3	32 ug/m3	-66 dBm	13.06 V
1732206696	20 ug/m3	29 ug/m3	32 ug/m3	-67 dBm	13.06 V
1732206374	21 ug/m3	30 ug/m3	34 ug/m3	-66 dBm	13.06 V
1732206244	19 ug/m3	28 ug/m3	32 ug/m3	-67 dBm	13.06 V
1732205921	19 ug/m3	26 ug/m3	29 ug/m3	-67 dBm	13 V
1732205599	20 ug/m3	28 ug/m3	29 ug/m3	-67 dBm	13.04 V
1732205277	20 ug/m3	26 ug/m3	27 ug/m3	-66 dBm	13 V
1732204955	19 ug/m3	27 ug/m3	29 ug/m3	-66 dBm	13.06 V
1732204633	20 ug/m3	28 ug/m3	31 ug/m3	-66 dBm	13 V
1732204311	17 ug/m3	23 ug/m3	25 ug/m3	-67 dBm	13.06 V
1732203988	19 ug/m3	26 ug/m3	27 ug/m3	-66 dBm	13.06 V
1732203667	20 ug/m3	27 ug/m3	29 ug/m3	-66 dBm	13.08 V
1732203344	19 ug/m3	23 ug/m3	26 ug/m3	-67 dBm	13.08 V
1732203022	18 ug/m3	23 ug/m3	24 ug/m3	-66 dBm	13.06 V
1732202700	18 ug/m3	22 ug/m3	23 ug/m3	-67 dBm	13.06 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)