APRS Track Direct

My position About ☰

reset

G7UHT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object G7UHT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1773536073	234 Pkts	185 Pkts	84 Pkts	-12 C
1773532475	267 Pkts	231 Pkts	91 Pkts	-12 C
1773528873	278 Pkts	237 Pkts	87 Pkts	-11 C
1773525274	248 Pkts	202 Pkts	89 Pkts	-11 C
1773521674	285 Pkts	234 Pkts	132 Pkts	-11 C
1773518074	292 Pkts	249 Pkts	118 Pkts	-12 C
1773514474	200 Pkts	163 Pkts	82 Pkts	-12 C
1773510874	209 Pkts	173 Pkts	115 Pkts	-12 C
1773507273	186 Pkts	148 Pkts	75 Pkts	-12 C
1773503674	206 Pkts	176 Pkts	123 Pkts	-13 C
1773500074	156 Pkts	121 Pkts	71 Pkts	-13 C
1773496474	172 Pkts	138 Pkts	56 Pkts	-13 C
1773492873	191 Pkts	155 Pkts	67 Pkts	-13 C
1773489273	208 Pkts	175 Pkts	74 Pkts	-13 C
1773485673	236 Pkts	207 Pkts	104 Pkts	-13 C
1773482072	256 Pkts	222 Pkts	122 Pkts	-12 C
1773478473	294 Pkts	252 Pkts	141 Pkts	-11 C
1773474873	200 Pkts	159 Pkts	69 Pkts	-10 C
1773471273	222 Pkts	180 Pkts	68 Pkts	-12 C
1773467672	230 Pkts	185 Pkts	66 Pkts	-12 C
1773464074	221 Pkts	181 Pkts	58 Pkts	-12 C
1773460476	189 Pkts	151 Pkts	61 Pkts	-12 C
1773456874	216 Pkts	177 Pkts	60 Pkts	-11 C
1773453273	234 Pkts	197 Pkts	67 Pkts	-11 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)