APRS Track Direct

My position About ☰

reset

WCSAR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WCSAR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Temp*	I1*
1766235581	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766234680	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766233779	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766232878	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766231978	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766231077	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766229275	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766228374	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766227473	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766226572	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766224771	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766222969	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766222068	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766221167	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766219366	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766217564	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766205854	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766203150	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766202249	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766201350	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766200447	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766199549	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766198646	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766197746	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA
1766196844	12.38 Volt	0 Pkt	0 Pkt	0 C	0 mA

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Temp: 0, 0.5, -64

I1: 0, 19.5, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)