APRS Track Direct

My position About ☰

reset

IR2DE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2DE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1745069471	6 Pkt	30 Pkt	0 Pkt	1.97 Pcnt	13 Pcnt
1745069171	9 Pkt	30 Pkt	1 Pkt	1.97 Pcnt	14 Pcnt
1745068871	5 Pkt	30 Pkt	1 Pkt	1.97 Pcnt	14 Pcnt
1745068571	8 Pkt	30 Pkt	0 Pkt	1.97 Pcnt	15 Pcnt
1745068271	5 Pkt	30 Pkt	0 Pkt	1.97 Pcnt	16 Pcnt
1745067971	7 Pkt	30 Pkt	1 Pkt	1.97 Pcnt	16 Pcnt
1745067671	6 Pkt	30 Pkt	1 Pkt	1.97 Pcnt	18 Pcnt
1745067371	2 Pkt	30 Pkt	0 Pkt	1.97 Pcnt	18 Pcnt
1745067071	1 Pkt	30 Pkt	0 Pkt	1.97 Pcnt	19 Pcnt
1745066771	2 Pkt	30 Pkt	0 Pkt	1.97 Pcnt	21 Pcnt
1745066471	2 Pkt	30 Pkt	0 Pkt	1.97 Pcnt	22 Pcnt
1745066171	5 Pkt	30 Pkt	0 Pkt	1.97 Pcnt	24 Pcnt
1745065871	10 Pkt	30 Pkt	0 Pkt	1.97 Pcnt	28 Pcnt
1745065571	9 Pkt	30 Pkt	0 Pkt	1.97 Pcnt	29 Pcnt
1745065271	10 Pkt	20 Pkt	0 Pkt	1.97 Pcnt	27 Pcnt
1745064971	6 Pkt	20 Pkt	0 Pkt	1.97 Pcnt	29 Pcnt
1745064671	4 Pkt	20 Pkt	0 Pkt	1.97 Pcnt	29 Pcnt
1745064371	4 Pkt	20 Pkt	0 Pkt	1.97 Pcnt	28 Pcnt
1745064071	2 Pkt	20 Pkt	0 Pkt	1.97 Pcnt	25 Pcnt
1745063771	2 Pkt	20 Pkt	0 Pkt	1.97 Pcnt	25 Pcnt
1745063471	5 Pkt	20 Pkt	0 Pkt	1.97 Pcnt	25 Pcnt
1745063171	4 Pkt	20 Pkt	1 Pkt	1.97 Pcnt	25 Pcnt
1745062871	4 Pkt	20 Pkt	1 Pkt	1.97 Pcnt	28 Pcnt
1745062571	6 Pkt	20 Pkt	0 Pkt	1.97 Pcnt	29 Pcnt
1745062271	3 Pkt	20 Pkt	0 Pkt	1.97 Pcnt	31 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)