APRS Track Direct

My position About ☰

reset

BV3BA-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BV3BA-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	PM2.5*	PM10*	UV*	CO*	O3*
1745048883	25 ug/m3	43 ug/m3	3 UVI	0.25 ppm	41 ppb
1745048283	25 ug/m3	43 ug/m3	4 UVI	0.25 ppm	41 ppb
1745047685	25 ug/m3	43 ug/m3	4 UVI	0.25 ppm	41 ppb
1745047085	25 ug/m3	43 ug/m3	5 UVI	0.25 ppm	41 ppb
1745046484	25 ug/m3	43 ug/m3	5 UVI	0.25 ppm	41 ppb
1745045883	22 ug/m3	42 ug/m3	6 UVI	0.27 ppm	43 ppb
1745045283	22 ug/m3	42 ug/m3	6 UVI	0.27 ppm	43 ppb
1745044684	22 ug/m3	42 ug/m3	7 UVI	0.27 ppm	43 ppb
1745044084	22 ug/m3	42 ug/m3	7 UVI	0.27 ppm	43 ppb
1745043483	22 ug/m3	42 ug/m3	8 UVI	0.27 ppm	43 ppb
1745042883	22 ug/m3	42 ug/m3	8 UVI	0.27 ppm	43 ppb
1745042285	26 ug/m3	39 ug/m3	8 UVI	0.28 ppm	50 ppb
1745041684	26 ug/m3	39 ug/m3	9 UVI	0.28 ppm	50 ppb
1745041084	26 ug/m3	39 ug/m3	9 UVI	0.28 ppm	50 ppb
1745040483	26 ug/m3	39 ug/m3	9 UVI	0.28 ppm	50 ppb
1745039883	26 ug/m3	39 ug/m3	9 UVI	0.28 ppm	50 ppb
1745039285	26 ug/m3	39 ug/m3	9 UVI	0.28 ppm	50 ppb
1745038687	18 ug/m3	40 ug/m3	9 UVI	0.28 ppm	43 ppb
1745038083	18 ug/m3	40 ug/m3	9 UVI	0.28 ppm	43 ppb
1745037485	18 ug/m3	40 ug/m3	9 UVI	0.28 ppm	43 ppb
1745036884	18 ug/m3	40 ug/m3	8 UVI	0.28 ppm	43 ppb
1745036283	18 ug/m3	40 ug/m3	8 UVI	0.28 ppm	43 ppb
1745035684	18 ug/m3	40 ug/m3	8 UVI	0.28 ppm	43 ppb
1745035083	16 ug/m3	39 ug/m3	8 UVI	0.32 ppm	39 ppb
1745034483	16 ug/m3	39 ug/m3	8 UVI	0.32 ppm	39 ppb

*Used Equation Coefficients:

PM2.5: 0, 1, 0

PM10: 0, 1, 0

UV: 0, 1, 0

CO: 0, 0.01, 0

O3: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)