This is the latest recevied telemetry packets stored in our database for station/object KB0ZTX-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1763243659 | 466 | 622 | 0 | 0 | 0 |
| 1763243539 | 473 | 624 | 0 | 0 | 0 |
| 1763243420 | 471 | 625 | 0 | 0 | 0 |
| 1763243301 | 462 | 626 | 0 | 0 | 0 |
| 1763243181 | 470 | 626 | 0 | 0 | 0 |
| 1763242942 | 461 | 621 | 0 | 0 | 0 |
| 1763241390 | 469 | 622 | 0 | 0 | 0 |
| 1763241151 | 464 | 623 | 0 | 0 | 0 |
| 1763240912 | 474 | 625 | 0 | 0 | 0 |
| 1763240792 | 479 | 626 | 0 | 0 | 0 |
| 1763240673 | 474 | 626 | 0 | 0 | 0 |
| 1763240554 | 475 | 625 | 0 | 0 | 0 |
| 1763240434 | 474 | 623 | 0 | 0 | 0 |
| 1763224564 | 469 | 604 | 0 | 0 | 0 |
| 1763166925 | 460 | 627 | 0 | 0 | 0 |
| 1763166806 | 466 | 625 | 0 | 0 | 0 |
| 1763166447 | 468 | 621 | 0 | 0 | 0 |
| 1763166328 | 464 | 618 | 0 | 0 | 0 |
| 1763158221 | 465 | 637 | 0 | 0 | 0 |
| 1763157982 | 468 | 637 | 0 | 0 | 0 |
| 1763157862 | 470 | 636 | 0 | 0 | 0 |
| 1763157623 | 471 | 636 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)