This is the latest recevied telemetry packets stored in our database for station/object OE6XDF-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1758218281 | 985.6 hPa | 21.8 C deg | 66.8 % | 407 - | 0 C deg |
| 1758216481 | 985.3 hPa | 21.9 C deg | 67.1 % | 407 - | 0 C deg |
| 1758214681 | 985.1 hPa | 22 C deg | 66.6 % | 454 - | 0 C deg |
| 1758212881 | 985 hPa | 22.2 C deg | 64.9 % | 518 - | 0 C deg |
| 1758211081 | 985 hPa | 22.2 C deg | 64.3 % | 547 - | 0 C deg |
| 1758209281 | 985 hPa | 22.3 C deg | 64.2 % | 551 - | 0 C deg |
| 1758207481 | 985 hPa | 22.2 C deg | 63.7 % | 558 - | 0 C deg |
| 1758205680 | 985.2 hPa | 22.2 C deg | 63.5 % | 560 - | 0 C deg |
| 1758203880 | 985.3 hPa | 22.1 C deg | 63.3 % | 566 - | 0 C deg |
| 1758202080 | 985.5 hPa | 22 C deg | 63.1 % | 574 - | 0 C deg |
| 1758200280 | 985.6 hPa | 21.9 C deg | 62.7 % | 585 - | 0 C deg |
| 1758198480 | 985.8 hPa | 21.9 C deg | 62.1 % | 593 - | 0 C deg |
| 1758196680 | 985.9 hPa | 21.7 C deg | 62 % | 596 - | 0 C deg |
| 1758194880 | 986.1 hPa | 21.6 C deg | 61.5 % | 611 - | 0 C deg |
| 1758193079 | 986.3 hPa | 21.5 C deg | 60.8 % | 631 - | 0 C deg |
| 1758191279 | 986.7 hPa | 21.4 C deg | 60.4 % | 642 - | 0 C deg |
| 1758189479 | 986.9 hPa | 21.3 C deg | 59.4 % | 653 - | 0 C deg |
| 1758187679 | 987 hPa | 21.2 C deg | 58.8 % | 643 - | 0 C deg |
| 1758185879 | 987 hPa | 21 C deg | 58.4 % | 612 - | 0 C deg |
| 1758184079 | 987.1 hPa | 20.9 C deg | 58.5 % | 582 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)