This is the latest recevied telemetry packets stored in our database for station/object IZ1RFL-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718716959 | -85 dbm | 2.94 V | 0 | 0 | 0 |
1718716356 | -85 dbm | 2.94 V | 0 | 0 | 0 |
1718715756 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718715156 | -82 dbm | 2.94 V | 0 | 0 | 0 |
1718714556 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718713961 | -82 dbm | 2.94 V | 0 | 0 | 0 |
1718713356 | -82 dbm | 2.94 V | 0 | 0 | 0 |
1718712756 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718712156 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718711556 | -84 dbm | 2.94 V | 0 | 0 | 0 |
1718710957 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718710356 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718709756 | -82 dbm | 2.94 V | 0 | 0 | 0 |
1718709156 | -82 dbm | 2.94 V | 0 | 0 | 0 |
1718708556 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718707956 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718707356 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718706756 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718706156 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718705556 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718704956 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718704356 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718703756 | -83 dbm | 2.94 V | 0 | 0 | 0 |
1718703156 | -82 dbm | 2.94 V | 0 | 0 | 0 |
1718702556 | -84 dbm | 2.94 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)