APRS Track Direct

My position About ☰

reset

W8VFR-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8VFR-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732288727	0.05 Rx Erlang	0.02 Tx Erlang	47 count/10m	0 count/10m	18 count/10m
1732287527	0.05 Rx Erlang	0.02 Tx Erlang	49 count/10m	0 count/10m	18 count/10m
1732286327	0.04 Rx Erlang	0.02 Tx Erlang	43 count/10m	0 count/10m	16 count/10m
1732285127	0.06 Rx Erlang	0.02 Tx Erlang	54 count/10m	4 count/10m	19 count/10m
1732283927	0.05 Rx Erlang	0.02 Tx Erlang	60 count/10m	0 count/10m	21 count/10m
1732282727	0.05 Rx Erlang	0.03 Tx Erlang	53 count/10m	0 count/10m	25 count/10m
1732281527	0.05 Rx Erlang	0.02 Tx Erlang	55 count/10m	1 count/10m	20 count/10m
1732280327	0.06 Rx Erlang	0.02 Tx Erlang	59 count/10m	0 count/10m	23 count/10m
1732279127	0.05 Rx Erlang	0.02 Tx Erlang	58 count/10m	0 count/10m	25 count/10m
1732277927	0.07 Rx Erlang	0.03 Tx Erlang	77 count/10m	0 count/10m	35 count/10m
1732276727	0.06 Rx Erlang	0.02 Tx Erlang	63 count/10m	0 count/10m	26 count/10m
1732275527	0.05 Rx Erlang	0.02 Tx Erlang	49 count/10m	0 count/10m	18 count/10m
1732274327	0.05 Rx Erlang	0.02 Tx Erlang	55 count/10m	0 count/10m	21 count/10m
1732273127	0.05 Rx Erlang	0.02 Tx Erlang	52 count/10m	0 count/10m	21 count/10m
1732271927	0.05 Rx Erlang	0.02 Tx Erlang	46 count/10m	0 count/10m	18 count/10m
1732270727	0.05 Rx Erlang	0.02 Tx Erlang	53 count/10m	1 count/10m	20 count/10m
1732269527	0.05 Rx Erlang	0.02 Tx Erlang	53 count/10m	0 count/10m	17 count/10m
1732268327	0.05 Rx Erlang	0.02 Tx Erlang	49 count/10m	0 count/10m	17 count/10m
1732267127	0.05 Rx Erlang	0.02 Tx Erlang	45 count/10m	0 count/10m	16 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)