This is the latest recevied telemetry packets stored in our database for station/object S56IAR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786729437 | 6 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786729254 | 8 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786728703 | 7 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786728520 | 7 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786728336 | 8 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786728153 | 7 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786727969 | 8 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786727785 | 8 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786727602 | 8 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786727418 | 7 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786727236 | 8 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786727051 | 7 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786726684 | 7 Nr | 13.12 Vdc | 0 | 0 | 0 |
| 1786726500 | 5 Nr | 13.12 Vdc | 0 | 0 | 0 |
| 1786726317 | 7 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786726133 | 8 Nr | 13.12 Vdc | 0 | 0 | 0 |
| 1786725950 | 7 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786725766 | 8 Nr | 13.12 Vdc | 0 | 0 | 0 |
| 1786725583 | 7 Nr | 13.12 Vdc | 0 | 0 | 0 |
| 1786725216 | 9 Nr | 13.12 Vdc | 0 | 0 | 0 |
| 1786725032 | 8 Nr | 13.12 Vdc | 0 | 0 | 0 |
| 1786724665 | 8 Nr | 13.13 Vdc | 0 | 0 | 0 |
| 1786724481 | 7 Nr | 13.11 Vdc | 0 | 0 | 0 |
| 1786724298 | 8 Nr | 13.12 Vdc | 0 | 0 | 0 |
| 1786724115 | 8 Nr | 13.13 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)