APRS Track Direct

My position About ☰

reset

AE5TC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AE5TC-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1766285641	0.28 Load	54.53 DegC	3183 Mb	430 Pkt	46 Pkt
1766285522	0.28 Load	55.02 DegC	3186 Mb	420 Pkt	61 Pkt
1766285462	0.27 Load	55.5 DegC	3185 Mb	440 Pkt	77 Pkt
1766285401	0.28 Load	55.02 DegC	3185 Mb	429 Pkt	91 Pkt
1766285342	0.24 Load	54.53 DegC	3185 Mb	462 Pkt	54 Pkt
1766285282	0.23 Load	54.53 DegC	3184 Mb	422 Pkt	44 Pkt
1766285161	0.25 Load	54.04 DegC	3180 Mb	391 Pkt	43 Pkt
1766285102	0.27 Load	54.53 DegC	3181 Mb	435 Pkt	95 Pkt
1766285042	0.23 Load	55.5 DegC	3179 Mb	409 Pkt	57 Pkt
1766284922	0.28 Load	55.02 DegC	3181 Mb	387 Pkt	65 Pkt
1766284862	0.22 Load	55.5 DegC	3180 Mb	449 Pkt	62 Pkt
1766284801	0.24 Load	54.53 DegC	3183 Mb	426 Pkt	117 Pkt
1766284742	0.23 Load	55.99 DegC	3182 Mb	419 Pkt	81 Pkt
1766284622	0.25 Load	55.5 DegC	3183 Mb	402 Pkt	104 Pkt
1766284562	0.27 Load	55.99 DegC	3179 Mb	442 Pkt	114 Pkt
1766284442	0.29 Load	55.02 DegC	3180 Mb	446 Pkt	137 Pkt
1766284381	0.3 Load	55.02 DegC	3182 Mb	448 Pkt	134 Pkt
1766284322	0.31 Load	55.5 DegC	3183 Mb	469 Pkt	102 Pkt
1766284262	0.3 Load	55.99 DegC	3180 Mb	464 Pkt	109 Pkt
1766284201	0.3 Load	55.02 DegC	3179 Mb	428 Pkt	116 Pkt
1766284142	0.26 Load	55.5 DegC	3181 Mb	444 Pkt	100 Pkt
1766284082	0.24 Load	55.5 DegC	3182 Mb	424 Pkt	107 Pkt
1766284022	0.26 Load	55.99 DegC	3183 Mb	441 Pkt	96 Pkt
1766283961	0.24 Load	54.53 DegC	3180 Mb	402 Pkt	68 Pkt
1766283842	0.24 Load	55.02 DegC	3181 Mb	428 Pkt	113 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)