This is the latest recevied telemetry packets stored in our database for station/object KL3EX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | DevTemp* | InTemp* | ExTemp* | Other* |
|---|---|---|---|---|---|
| 1770531038 | 1160 V | 113 F | 87 F | 69 F | 0 |
| 1770529839 | 1160 V | 110 F | 87 F | 71 F | 0 |
| 1770527169 | 1163 V | 104 F | 75 F | -1 F | 0 |
| 1770523617 | 1160 V | 113 F | 87 F | -1 F | 0 |
| 1770522416 | 1160 V | 113 F | 86 F | -1 F | 0 |
| 1770521217 | 1160 V | 111 F | 86 F | -1 F | 0 |
| 1770520016 | 1160 V | 113 F | 87 F | -1 F | 0 |
| 1770518817 | 1160 V | 112 F | 86 F | -1 F | 0 |
| 1770517618 | 1160 V | 113 F | 86 F | -1 F | 0 |
| 1770516416 | 1160 V | 112 F | 85 F | -1 F | 0 |
| 1770515217 | 1163 V | 110 F | 85 F | -1 F | 0 |
| 1770514016 | 1163 V | 112 F | 86 F | -1 F | 0 |
| 1770512817 | 1160 V | 109 F | 84 F | -1 F | 0 |
| 1770511617 | 1160 V | 111 F | 86 F | -1 F | 0 |
| 1770510416 | 1163 V | 111 F | 86 F | -1 F | 0 |
| 1770509217 | 1163 V | 108 F | 85 F | -1 F | 0 |
| 1770508016 | 1160 V | 112 F | 86 F | -1 F | 0 |
| 1770506817 | 1163 V | 110 F | 86 F | -1 F | 0 |
| 1770505616 | 1160 V | 111 F | 79 F | -1 F | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
DevTemp: 0, 1, 0
InTemp: 0, 1, 0
ExTemp: 0, 1, 0
Other: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)