APRS Track Direct

My position About ☰

reset

LU8ANS-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU8ANS-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1775085482	56 Pkt	3 Pkt	-37 dBm	12.82 V
1775084542	65 Pkt	1 Pkt	-35 dBm	12.82 V
1775083618	67 Pkt	4 Pkt	-34 dBm	12.82 V
1775082694	63 Pkt	0 Pkt	-35 dBm	12.86 V
1775081771	115 Pkt	2 Pkt	-35 dBm	12.86 V
1775080845	94 Pkt	0 Pkt	-33 dBm	12.82 V
1775079279	67 Pkt	3 Pkt	-34 dBm	12.76 V
1775078355	53 Pkt	5 Pkt	-36 dBm	12.8 V
1775077432	35 Pkt	4 Pkt	-32 dBm	12.8 V
1775076509	34 Pkt	6 Pkt	-34 dBm	12.8 V
1775075586	62 Pkt	4 Pkt	-32 dBm	12.8 V
1775074662	42 Pkt	8 Pkt	-36 dBm	12.8 V
1775073738	47 Pkt	3 Pkt	-33 dBm	12.8 V
1775072815	50 Pkt	4 Pkt	-32 dBm	12.8 V
1775071890	83 Pkt	2 Pkt	-30 dBm	12.8 V
1775070966	87 Pkt	8 Pkt	-34 dBm	12.84 V
1775070042	60 Pkt	1 Pkt	-33 dBm	12.86 V
1775069118	66 Pkt	6 Pkt	-26 dBm	12.86 V
1775068194	35 Pkt	2 Pkt	-35 dBm	12.86 V
1775067271	57 Pkt	7 Pkt	-33 dBm	12.92 V
1775066348	51 Pkt	1 Pkt	-36 dBm	12.9 V
1775065424	55 Pkt	7 Pkt	-30 dBm	12.9 V
1775064501	47 Pkt	5 Pkt	-30 dBm	12.9 V
1775063577	74 Pkt	3 Pkt	-36 dBm	12.9 V
1775062654	43 Pkt	2 Pkt	-35 dBm	12.92 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)