APRS Track Direct

My position About ☰

reset

HP2PCN-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP2PCN-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	EffTo*
1836274695	13.43 Volt	100 Pkt	40 Pkt	54 Pcnt	55 Pcnt
1836274545	13.43 Volt	120 Pkt	40 Pkt	58 Pcnt	55 Pcnt
1836274095	13.43 Volt	110 Pkt	30 Pkt	52 Pcnt	55 Pcnt
1762286056	13.43 Volt	90 Pkt	30 Pkt	72 Pcnt	55 Pcnt
1762285456	13.43 Volt	90 Pkt	30 Pkt	77 Pcnt	55 Pcnt
1762284856	13.43 Volt	100 Pkt	30 Pkt	80 Pcnt	55 Pcnt
1762284256	13.43 Volt	100 Pkt	30 Pkt	85 Pcnt	55 Pcnt
1762283656	13.43 Volt	100 Pkt	30 Pkt	88 Pcnt	55 Pcnt
1762283056	13.43 Volt	90 Pkt	20 Pkt	85 Pcnt	55 Pcnt
1762282456	13.43 Volt	100 Pkt	30 Pkt	91 Pcnt	55 Pcnt
1762281856	13.43 Volt	100 Pkt	30 Pkt	88 Pcnt	55 Pcnt
1762281256	13.43 Volt	100 Pkt	30 Pkt	83 Pcnt	55 Pcnt
1762280657	13.43 Volt	90 Pkt	30 Pkt	79 Pcnt	55 Pcnt
1762280056	13.43 Volt	90 Pkt	20 Pkt	74 Pcnt	55 Pcnt
1762279456	13.43 Volt	100 Pkt	30 Pkt	74 Pcnt	55 Pcnt
1762278856	13.43 Volt	110 Pkt	30 Pkt	71 Pcnt	55 Pcnt
1762278256	13.43 Volt	120 Pkt	30 Pkt	76 Pcnt	55 Pcnt
1762277657	13.43 Volt	140 Pkt	30 Pkt	79 Pcnt	55 Pcnt
1762277056	13.43 Volt	150 Pkt	30 Pkt	80 Pcnt	55 Pcnt
1762276458	13.43 Volt	140 Pkt	30 Pkt	83 Pcnt	55 Pcnt
1762275856	13.43 Volt	130 Pkt	30 Pkt	82 Pcnt	55 Pcnt
1762275256	13.43 Volt	110 Pkt	20 Pkt	83 Pcnt	55 Pcnt
1762274656	13.43 Volt	100 Pkt	20 Pkt	79 Pcnt	55 Pcnt
1762274058	13.43 Volt	100 Pkt	20 Pkt	79 Pcnt	55 Pcnt
1762273456	13.43 Volt	90 Pkt	30 Pkt	80 Pcnt	55 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTo: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)