This is the latest recevied telemetry packets stored in our database for station/object EB5CGD-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770501153 | 0 Count | 968 Count | 0 Count | 0 VDC | 0 VDC |
| 1770499893 | 0 Count | 967 Count | 0 Count | 0 VDC | 0 VDC |
| 1770498633 | 0 Count | 967 Count | 0 Count | 0 VDC | 0 VDC |
| 1770497373 | 0 Count | 967 Count | 0 Count | 0 VDC | 0 VDC |
| 1770496113 | 0 Count | 949 Count | 0 Count | 0 VDC | 0 VDC |
| 1770494853 | 0 Count | 925 Count | 0 Count | 0 VDC | 0 VDC |
| 1770493593 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1770492333 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1770491073 | 0 Count | 923 Count | 0 Count | 0 VDC | 0 VDC |
| 1770489813 | 0 Count | 923 Count | 0 Count | 0 VDC | 0 VDC |
| 1770488553 | 0 Count | 921 Count | 0 Count | 0 VDC | 0 VDC |
| 1770487293 | 0 Count | 919 Count | 0 Count | 0 VDC | 0 VDC |
| 1770486033 | 0 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1770484773 | 0 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1770483513 | 0 Count | 894 Count | 0 Count | 0 VDC | 0 VDC |
| 1770482610 | 0 Count | 894 Count | 0 Count | 0 VDC | 0 VDC |
| 1770481351 | 0 Count | 894 Count | 0 Count | 0 VDC | 0 VDC |
| 1770480090 | 0 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
| 1770478830 | 0 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
| 1770477570 | 0 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1770476310 | 0 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1770475050 | 0 Count | 891 Count | 0 Count | 0 VDC | 0 VDC |
| 1770473790 | 0 Count | 891 Count | 0 Count | 0 VDC | 0 VDC |
| 1770472530 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1770471270 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)