This is the latest recevied telemetry packets stored in our database for station/object YE3ESW-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786746476 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786746410 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786746346 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786746283 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786746219 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786746191 | 33 °C | 34 %RH | 1013 hPa | 0 | 0 |
| 1786746155 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786746091 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786746027 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786745900 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786745836 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786745772 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786745709 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786745645 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786745581 | 33 °C | 38 %RH | 1014 hPa | 0 | 0 |
| 1786745517 | 33 °C | 38 %RH | 1014 hPa | 0 | 0 |
| 1786745454 | 33 °C | 38 %RH | 1014 hPa | 0 | 0 |
| 1786745389 | 33 °C | 33 %RH | 1013 hPa | 0 | 0 |
| 1786745326 | 33 °C | 38 %RH | 1014 hPa | 0 | 0 |
| 1786745263 | 33 °C | 39 %RH | 1014 hPa | 0 | 0 |
| 1786745216 | 32 °C | 34 %RH | 1013 hPa | 0 | 0 |
| 1786745199 | 33 °C | 38 %RH | 1014 hPa | 0 | 0 |
| 1786745135 | 33 °C | 38 %RH | 1014 hPa | 0 | 0 |
| 1786745071 | 33 °C | 38 %RH | 1014 hPa | 0 | 0 |
| 1786744976 | 32 °C | 34 %RH | 1013 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)