This is the latest recevied telemetry packets stored in our database for station/object SR9WXG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10min* | Digi10min* | BatAmps* | BatVolt* | PvVolt* |
|---|---|---|---|---|---|
| 1774109022 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774108419 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774107820 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774107217 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774106617 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774106015 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774105415 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774104812 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774104212 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774103610 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774103010 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774102400 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774101797 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774101194 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774100594 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774099991 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774099391 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774098789 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774098189 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774097586 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774096986 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774096384 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774095784 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774095181 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
| 1774094581 | 0 Pkt | 0 Pkt | -0.02 A | 4 V | 4 V |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Digi10min: 0, 1, 0
BatAmps: 0, 0.07, -8
BatVolt: 0, 0.07, 4
PvVolt: 0, 0.07, 4
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)