This is the latest recevied telemetry packets stored in our database for station/object IW0RQJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10m* | Rx1h* | Dg10m* | DgR* | Eff* |
|---|---|---|---|---|---|
| 1794906841 | 100 Pkt | 590 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794906541 | 86 Pkt | 580 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794906241 | 95 Pkt | 600 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794905941 | 79 Pkt | 590 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794905641 | 66 Pkt | 600 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794905341 | 93 Pkt | 610 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794905041 | 113 Pkt | 620 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794904741 | 100 Pkt | 610 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794904441 | 95 Pkt | 610 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794904141 | 95 Pkt | 620 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794903841 | 79 Pkt | 620 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794903541 | 78 Pkt | 620 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794903241 | 100 Pkt | 640 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794902941 | 109 Pkt | 660 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794902641 | 98 Pkt | 650 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794902341 | 90 Pkt | 630 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794902041 | 95 Pkt | 640 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794901741 | 90 Pkt | 630 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794901441 | 112 Pkt | 630 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794901141 | 101 Pkt | 620 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794900841 | 102 Pkt | 620 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794900541 | 97 Pkt | 590 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794900241 | 102 Pkt | 590 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794899941 | 108 Pkt | 590 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
| 1794899641 | 104 Pkt | 570 Pkt | 0 Pkt | 0 Pcnt | 55 Pcnt |
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)