This is the latest recevied telemetry packets stored in our database for station/object DH8WM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770423811 | 16.5 deg C | 33.4 % | 1000.2 hPa | 0 | 0 |
| 1770423605 | 16.5 deg C | 33.4 % | 999.2 hPa | 0 | 0 |
| 1770422705 | 16.5 deg C | 33.3 % | 1000.8 hPa | 0 | 0 |
| 1770421805 | 16.6 deg C | 33.3 % | 998.9 hPa | 0 | 0 |
| 1770420905 | 16.7 deg C | 33.2 % | 1000.5 hPa | 0 | 0 |
| 1770420005 | 16.8 deg C | 33.2 % | 998.8 hPa | 0 | 0 |
| 1770419105 | 16.9 deg C | 33.1 % | 998.8 hPa | 0 | 0 |
| 1770418205 | 17 deg C | 33.1 % | 999.4 hPa | 0 | 0 |
| 1770417305 | 17.1 deg C | 33 % | 998.9 hPa | 0 | 0 |
| 1770416405 | 17.3 deg C | 33 % | 999.7 hPa | 0 | 0 |
| 1770415505 | 17.4 deg C | 32.9 % | 998.6 hPa | 0 | 0 |
| 1770414605 | 17.5 deg C | 32.9 % | 998.3 hPa | 0 | 0 |
| 1770413705 | 17.6 deg C | 32.9 % | 998.7 hPa | 0 | 0 |
| 1770413374 | 17.7 deg C | 32.8 % | 998.5 hPa | 0 | 0 |
| 1770412473 | 17.7 deg C | 32.9 % | 998.5 hPa | 0 | 0 |
| 1770411573 | 17.6 deg C | 33 % | 997.6 hPa | 0 | 0 |
| 1770410673 | 17.5 deg C | 33.1 % | 998.2 hPa | 0 | 0 |
| 1770409773 | 17.6 deg C | 33.1 % | 996.2 hPa | 0 | 0 |
| 1770408873 | 17.7 deg C | 33 % | 996.3 hPa | 0 | 0 |
| 1770407973 | 17.8 deg C | 32.9 % | 997.6 hPa | 0 | 0 |
| 1770407073 | 18 deg C | 33 % | 995.8 hPa | 0 | 0 |
| 1770406173 | 18.1 deg C | 33 % | 996.5 hPa | 0 | 0 |
| 1770405273 | 18.2 deg C | 33 % | 994.9 hPa | 0 | 0 |
| 1770404373 | 18.1 deg C | 33.1 % | 995.8 hPa | 0 | 0 |
| 1770403473 | 17.9 deg C | 33.3 % | 996.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)