This is the latest recevied telemetry packets stored in our database for station/object SP5DJV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Radiation* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754134162 | 0.14 uSv/h | 0 | 0 | 0 | 0 |
| 1754133334 | 0.11 uSv/h | 0 | 0 | 0 | 0 |
| 1754132262 | 0.1 uSv/h | 0 | 0 | 0 | 0 |
| 1754130361 | 0.1 uSv/h | 0 | 0 | 0 | 0 |
| 1754129499 | 0.09 uSv/h | 0 | 0 | 0 | 0 |
| 1754128555 | 0.08 uSv/h | 0 | 0 | 0 | 0 |
| 1754127529 | 0.09 uSv/h | 0 | 0 | 0 | 0 |
| 1754124995 | 0.09 uSv/h | 0 | 0 | 0 | 0 |
| 1754124201 | 0.11 uSv/h | 0 | 0 | 0 | 0 |
| 1754123426 | 0.13 uSv/h | 0 | 0 | 0 | 0 |
| 1754122621 | 0.1 uSv/h | 0 | 0 | 0 | 0 |
| 1754121866 | 0.15 uSv/h | 0 | 0 | 0 | 0 |
| 1754120228 | 0.12 uSv/h | 0 | 0 | 0 | 0 |
| 1754119393 | 0.06 uSv/h | 0 | 0 | 0 | 0 |
| 1754116804 | 0.14 uSv/h | 0 | 0 | 0 | 0 |
| 1754115969 | 0.09 uSv/h | 0 | 0 | 0 | 0 |
| 1754115048 | 0.13 uSv/h | 0 | 0 | 0 | 0 |
| 1754114004 | 0.09 uSv/h | 0 | 0 | 0 | 0 |
| 1754113246 | 0.1 uSv/h | 0 | 0 | 0 | 0 |
| 1754112511 | 0.11 uSv/h | 0 | 0 | 0 | 0 |
| 1754111650 | 0.15 uSv/h | 0 | 0 | 0 | 0 |
| 1754109245 | 0.11 uSv/h | 0 | 0 | 0 | 0 |
| 1754108415 | 0.09 uSv/h | 0 | 0 | 0 | 0 |
| 1754107438 | 0.08 uSv/h | 0 | 0 | 0 | 0 |
| 1754105360 | 0.1 uSv/h | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Radiation: 0, 0.001, 0
Value2: 0, 0, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)