This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836273884 | 14.74 | -261.6 | 126.88 | 1 | 37 |
| 1782512478 | 14.87 | -224 | 140 | 1 | 34 |
| 1782511568 | 14.87 | -224.8 | 140 | 1 | 34 |
| 1782510658 | 14.87 | -224.8 | 136.88 | 1 | 34 |
| 1782509748 | 14.87 | -224.8 | 140 | 1 | 34 |
| 1782508838 | 14.87 | -224.4 | 139.38 | 1 | 34 |
| 1782507928 | 14.87 | -224.8 | 135 | 1 | 34 |
| 1782507018 | 14.87 | -224.8 | 139.38 | 1 | 34 |
| 1782506108 | 14.87 | -224.4 | 139.38 | 1 | 34 |
| 1782505198 | 14.87 | -224.4 | 139.38 | 1 | 34 |
| 1782504288 | 14.87 | -224.4 | 139.38 | 1 | 34 |
| 1782503853 | 14.87 | -224.4 | 133.75 | 1 | 34 |
| 1782502468 | 14.87 | -224.4 | 132.5 | 1 | 34 |
| 1782501558 | 14.87 | -224.4 | 133.13 | 1 | 34 |
| 1782500648 | 14.87 | -224.4 | 133.13 | 1 | 34 |
| 1782499738 | 14.87 | -224.4 | 135.63 | 1 | 35 |
| 1782498828 | 14.87 | -224.8 | 135 | 1 | 34 |
| 1782497918 | 14.87 | -224.8 | 136.88 | 1 | 34 |
| 1782497008 | 14.87 | -224.8 | 135 | 1 | 34 |
| 1782496098 | 14.87 | -224.8 | 136.25 | 1 | 34 |
| 1782495188 | 14.87 | -224.8 | 135.63 | 1 | 35 |
| 1782494278 | 14.87 | -224.8 | 135 | 1 | 34 |
| 1782493368 | 14.87 | -225.2 | 133.13 | 1 | 34 |
| 1782492458 | 14.87 | -224.8 | 133.13 | 1 | 35 |
| 1782491548 | 14.87 | -224.8 | 133.13 | 1 | 34 |
*Used Equation Coefficients:
Value1: 0, -0.0644, 15
Value2: 0, -0.4, -190
Value3: 0, 0.625, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)