This is the latest recevied telemetry packets stored in our database for station/object K7KLA-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750179080 | 393 | 614 | 327 | 0 | 0 |
| 1750178181 | 393 | 613 | 329 | 0 | 0 |
| 1750177255 | 395 | 611 | 332 | 0 | 0 |
| 1750176356 | 392 | 610 | 328 | 0 | 0 |
| 1750174560 | 385 | 608 | 331 | 0 | 0 |
| 1750141226 | 293 | 621 | 321 | 0 | 0 |
| 1750140327 | 315 | 623 | 323 | 0 | 0 |
| 1750139400 | 316 | 624 | 449 | 0 | 0 |
| 1750138501 | 325 | 625 | 319 | 0 | 0 |
| 1750137601 | 341 | 627 | 316 | 0 | 0 |
| 1750134902 | 364 | 630 | 311 | 0 | 0 |
| 1750134003 | 369 | 632 | 309 | 0 | 0 |
| 1750132203 | 379 | 635 | 303 | 0 | 0 |
| 1750131303 | 381 | 636 | 307 | 0 | 0 |
| 1750130375 | 383 | 637 | 302 | 0 | 0 |
| 1750129475 | 384 | 637 | 303 | 0 | 0 |
| 1750128575 | 385 | 637 | 303 | 0 | 0 |
| 1750126775 | 387 | 638 | 302 | 0 | 0 |
| 1750125874 | 388 | 638 | 303 | 0 | 0 |
| 1750124974 | 389 | 638 | 305 | 0 | 0 |
| 1750124074 | 390 | 638 | 302 | 0 | 0 |
| 1750123174 | 388 | 638 | 305 | 0 | 0 |
| 1750122274 | 390 | 637 | 302 | 0 | 0 |
| 1750121374 | 392 | 638 | 302 | 0 | 0 |
| 1750120474 | 390 | 637 | 303 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)