This is the latest recevied telemetry packets stored in our database for station/object DH9ZIG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758185266 | 19.9 deg C | 60.5 % | 1025.6 hPa | 0 | 0 |
| 1758184366 | 19.4 deg C | 61.4 % | 1025.8 hPa | 0 | 0 |
| 1758183466 | 19 deg C | 64.4 % | 1025.9 hPa | 0 | 0 |
| 1758182566 | 18.5 deg C | 67.3 % | 1025.9 hPa | 0 | 0 |
| 1758181665 | 17.8 deg C | 69.2 % | 1026.1 hPa | 0 | 0 |
| 1758180765 | 17.3 deg C | 71.1 % | 1026.1 hPa | 0 | 0 |
| 1758179865 | 16.8 deg C | 73 % | 1026.1 hPa | 0 | 0 |
| 1758178965 | 16.1 deg C | 75.2 % | 1026.1 hPa | 0 | 0 |
| 1758178065 | 15.5 deg C | 77.6 % | 1026.2 hPa | 0 | 0 |
| 1758177165 | 14.9 deg C | 80 % | 1026.4 hPa | 0 | 0 |
| 1758176265 | 14.2 deg C | 82.4 % | 1026.5 hPa | 0 | 0 |
| 1758175365 | 13.4 deg C | 85.5 % | 1026.6 hPa | 0 | 0 |
| 1758174465 | 12.6 deg C | 88.9 % | 1026.8 hPa | 0 | 0 |
| 1758173565 | 12.1 deg C | 90.2 % | 1026.9 hPa | 0 | 0 |
| 1758172665 | 11.8 deg C | 91 % | 1026.8 hPa | 0 | 0 |
| 1758171765 | 11.6 deg C | 91.3 % | 1026.9 hPa | 0 | 0 |
| 1758170864 | 11.6 deg C | 91.2 % | 1026.9 hPa | 0 | 0 |
| 1758169964 | 11.8 deg C | 91 % | 1026.8 hPa | 0 | 0 |
| 1758169064 | 11.9 deg C | 90.6 % | 1026.6 hPa | 0 | 0 |
| 1758168164 | 12 deg C | 90.1 % | 1026.6 hPa | 0 | 0 |
| 1758167264 | 12.3 deg C | 89.3 % | 1026.6 hPa | 0 | 0 |
| 1758166364 | 12.5 deg C | 88.8 % | 1026.5 hPa | 0 | 0 |
| 1758165464 | 12.7 deg C | 88.3 % | 1026.4 hPa | 0 | 0 |
| 1758164564 | 12.7 deg C | 88 % | 1026.4 hPa | 0 | 0 |
| 1758163664 | 12.9 deg C | 87.4 % | 1026.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)