This is the latest recevied telemetry packets stored in our database for station/object 2E0UMR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774463510 | 163 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774461707 | 162 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774459903 | 161 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774458100 | 160 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774456296 | 159 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774454493 | 158 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774452689 | 157 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774450886 | 156 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774449082 | 155 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774447278 | 154 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774445476 | 153 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774443703 | 152 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774441899 | 151 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774440095 | 150 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774438291 | 149 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774436487 | 148 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774434683 | 147 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774432880 | 146 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774431075 | 145 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774429272 | 144 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774427468 | 143 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774425664 | 142 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774423861 | 141 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774422099 | 140 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1774420296 | 139 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)