This is the latest recevied telemetry packets stored in our database for station/object SP6RTS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770260820 | 0 Count | 809 Count | 0 Count | 0 VDC | 0 VDC |
| 1770259920 | 0 Count | 792 Count | 0 Count | 0 VDC | 0 VDC |
| 1770259020 | 0 Count | 773 Count | 0 Count | 0 VDC | 0 VDC |
| 1770258120 | 0 Count | 760 Count | 0 Count | 0 VDC | 0 VDC |
| 1770257220 | 0 Count | 739 Count | 0 Count | 0 VDC | 0 VDC |
| 1770256320 | 0 Count | 719 Count | 0 Count | 0 VDC | 0 VDC |
| 1770255420 | 0 Count | 694 Count | 0 Count | 0 VDC | 0 VDC |
| 1770254519 | 0 Count | 669 Count | 0 Count | 0 VDC | 0 VDC |
| 1770253619 | 0 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1770252719 | 0 Count | 625 Count | 0 Count | 0 VDC | 0 VDC |
| 1770251819 | 0 Count | 609 Count | 0 Count | 0 VDC | 0 VDC |
| 1770250919 | 0 Count | 588 Count | 0 Count | 0 VDC | 0 VDC |
| 1770250019 | 0 Count | 574 Count | 0 Count | 0 VDC | 0 VDC |
| 1770249119 | 0 Count | 551 Count | 0 Count | 0 VDC | 0 VDC |
| 1770248218 | 0 Count | 535 Count | 0 Count | 0 VDC | 0 VDC |
| 1770247318 | 0 Count | 519 Count | 0 Count | 0 VDC | 0 VDC |
| 1770246418 | 0 Count | 500 Count | 0 Count | 0 VDC | 0 VDC |
| 1770245518 | 0 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1770244617 | 0 Count | 471 Count | 0 Count | 0 VDC | 0 VDC |
| 1770243717 | 0 Count | 454 Count | 0 Count | 0 VDC | 0 VDC |
| 1770243305 | 0 Count | 447 Count | 0 Count | 0 VDC | 0 VDC |
| 1770242404 | 0 Count | 429 Count | 0 Count | 0 VDC | 0 VDC |
| 1770241503 | 0 Count | 401 Count | 0 Count | 0 VDC | 0 VDC |
| 1770240603 | 0 Count | 362 Count | 0 Count | 0 VDC | 0 VDC |
| 1770239702 | 0 Count | 342 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)