This is the latest recevied telemetry packets stored in our database for station/object KG0KM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 04/22/2025 3:57:11 AM+00:00 | 439 | 610 | 0 | 0 | 0 |
| 04/22/2025 3:55:11 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 3:39:14 AM+00:00 | 439 | 610 | 0 | 0 | 0 |
| 04/22/2025 3:37:15 AM+00:00 | 439 | 610 | 0 | 0 | 0 |
| 04/22/2025 3:35:15 AM+00:00 | 442 | 611 | 0 | 0 | 0 |
| 04/22/2025 3:33:15 AM+00:00 | 439 | 610 | 0 | 0 | 0 |
| 04/22/2025 3:25:16 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 3:23:17 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 3:19:17 AM+00:00 | 439 | 610 | 0 | 0 | 0 |
| 04/22/2025 3:17:18 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 3:15:18 AM+00:00 | 439 | 610 | 0 | 0 | 0 |
| 04/22/2025 3:13:19 AM+00:00 | 439 | 610 | 0 | 0 | 0 |
| 04/22/2025 3:05:20 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 3:03:20 AM+00:00 | 439 | 610 | 0 | 0 | 0 |
| 04/22/2025 2:59:21 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 2:57:21 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 2:55:21 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 2:51:22 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 2:45:23 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 2:43:23 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 2:41:24 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 2:37:24 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 2:35:25 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 2:31:25 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
| 04/22/2025 2:27:26 AM+00:00 | 439 | 609 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)