This is the latest recevied telemetry packets stored in our database for station/object YB1TJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774157978 | 9 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774155978 | 10 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774153978 | 10 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774151976 | 11 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774149976 | 10 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774147976 | 9 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774145976 | 10 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774143976 | 9 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774141976 | 9 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774139978 | 9 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774137976 | 9 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774135976 | 9 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774133976 | 9 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774131976 | 9 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774129976 | 11 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774127976 | 14 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774125976 | 13 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774123976 | 13 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774121976 | 13 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774119976 | 13 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774117976 | 14 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774115976 | 14 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774113976 | 14 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774111976 | 14 °C | 0 %RH | 0 hPa | 0 | 0 |
| 1774109976 | 13 °C | 0 %RH | 0 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)