APRS Track Direct

My position About ☰

reset

N7UW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7UW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790640948	14.03 Volt	130 Pkt	60 Pkt	34 Pcnt
1790640347	14.03 Volt	120 Pkt	60 Pkt	34 Pcnt
1790639747	14.03 Volt	100 Pkt	50 Pkt	30 Pcnt
1790639146	14.03 Volt	90 Pkt	50 Pkt	27 Pcnt
1790638547	14.03 Volt	100 Pkt	50 Pkt	29 Pcnt
1790637947	14.03 Volt	90 Pkt	50 Pkt	30 Pcnt
1790637347	14.03 Volt	100 Pkt	50 Pkt	32 Pcnt
1790636747	14.03 Volt	100 Pkt	60 Pkt	34 Pcnt
1790636147	14.03 Volt	90 Pkt	60 Pkt	35 Pcnt
1790635549	14.03 Volt	90 Pkt	60 Pkt	37 Pcnt
1790634948	14.03 Volt	80 Pkt	50 Pkt	33 Pcnt
1790634349	14.03 Volt	80 Pkt	50 Pkt	31 Pcnt
1790633747	14.03 Volt	100 Pkt	60 Pkt	33 Pcnt
1790633150	14.03 Volt	100 Pkt	60 Pkt	32 Pcnt
1790632547	14.03 Volt	120 Pkt	60 Pkt	33 Pcnt
1790631949	14.03 Volt	130 Pkt	60 Pkt	34 Pcnt
1790631347	14.03 Volt	130 Pkt	60 Pkt	36 Pcnt
1790630747	14.03 Volt	130 Pkt	50 Pkt	35 Pcnt
1790630154	14.03 Volt	130 Pkt	50 Pkt	36 Pcnt
1790629548	14.03 Volt	140 Pkt	50 Pkt	37 Pcnt
1790628948	14.03 Volt	140 Pkt	50 Pkt	38 Pcnt
1790628349	14.03 Volt	130 Pkt	40 Pkt	39 Pcnt
1790627747	14.03 Volt	130 Pkt	40 Pkt	38 Pcnt
1790627147	14.03 Volt	130 Pkt	40 Pkt	41 Pcnt
1790626548	14.03 Volt	130 Pkt	40 Pkt	41 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)