This is the latest recevied telemetry packets stored in our database for station/object F4JFO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792156847 | 0 | 28 | 0 | 5 | 0 |
| 1792156247 | 0 | 8 | 0 | 3 | 0 |
| 1792155647 | 0 | 51 | 0 | 5 | 0 |
| 1792155047 | 0 | 22 | 0 | 2 | 0 |
| 1792154447 | 0 | 3 | 0 | 2 | 0 |
| 1792153847 | 0 | 15 | 0 | 1 | 0 |
| 1792153247 | 0 | 26 | 0 | 2 | 0 |
| 1792152647 | 0 | 1 | 0 | 1 | 0 |
| 1792152047 | 0 | 45 | 0 | 3 | 0 |
| 1792151447 | 0 | 28 | 0 | 4 | 0 |
| 1792150847 | 0 | 0 | 0 | 0 | 0 |
| 1792150247 | 0 | 16 | 0 | 2 | 0 |
| 1792149647 | 0 | 44 | 0 | 4 | 0 |
| 1792149047 | 0 | 78 | 0 | 8 | 0 |
| 1792148447 | 0 | 44 | 0 | 2 | 0 |
| 1792147847 | 0 | 29 | 0 | 6 | 0 |
| 1792147247 | 0 | 4 | 0 | 2 | 0 |
| 1792146647 | 0 | 65 | 0 | 9 | 0 |
| 1792146047 | 0 | 38 | 0 | 4 | 0 |
| 1792145447 | 0 | 2 | 0 | 1 | 0 |
| 1792144847 | 0 | 45 | 0 | 3 | 0 |
| 1792144247 | 0 | 33 | 0 | 4 | 0 |
| 1792143647 | 0 | 5 | 0 | 2 | 0 |
| 1792143090 | 0 | 25 | 0 | 3 | 0 |
| 1792142834 | 0 | 16 | 0 | 2 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)