This is the latest recevied telemetry packets stored in our database for station/object LU4FJA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1770430302 | 0 Pkt | 1 Pkt | 0 Pkt | -38 dBm | 0 V |
| 1770429380 | 0 Pkt | 0 Pkt | 0 Pkt | -38 dBm | 0 V |
| 1770428458 | 0 Pkt | 0 Pkt | 0 Pkt | -38 dBm | 0 V |
| 1770427901 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1770426979 | 0 Pkt | 1 Pkt | 0 Pkt | -46 dBm | 0 V |
| 1770426057 | 0 Pkt | 1 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1770425135 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 0 V |
| 1770424213 | 0 Pkt | 1 Pkt | 0 Pkt | -44 dBm | 0 V |
| 1770423291 | 0 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0 V |
| 1770422369 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 0 V |
| 1770421447 | 0 Pkt | 0 Pkt | 0 Pkt | -37 dBm | 0 V |
| 1770420525 | 0 Pkt | 0 Pkt | 0 Pkt | -39 dBm | 0 V |
| 1770419603 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 V |
| 1770418681 | 0 Pkt | 0 Pkt | 0 Pkt | -38 dBm | 0 V |
| 1770417759 | 0 Pkt | 0 Pkt | 0 Pkt | -40 dBm | 0 V |
| 1770416837 | 0 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 0 V |
| 1770415915 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 0 V |
| 1770414993 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 0 V |
| 1770414071 | 0 Pkt | 0 Pkt | 0 Pkt | -44 dBm | 0 V |
| 1770413149 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0 V |
| 1770412225 | 0 Pkt | 3 Pkt | 0 Pkt | -48 dBm | 0 V |
| 1770411303 | 0 Pkt | 1 Pkt | 0 Pkt | -50 dBm | 0 V |
| 1770410381 | 0 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0 V |
| 1770409459 | 0 Pkt | 1 Pkt | 0 Pkt | -47 dBm | 0 V |
| 1770408537 | 0 Pkt | 1 Pkt | 0 Pkt | -46 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)