This is the latest recevied telemetry packets stored in our database for station/object F4EXC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Temp* |
---|---|---|---|---|---|
1719657681 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26.5 C |
1719657381 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26.5 C |
1719657081 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26.5 C |
1719656781 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26.5 C |
1719656481 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719656181 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719655881 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719655581 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719655281 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719654981 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719654681 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719654381 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719654081 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719653781 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719653481 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719653181 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719652881 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719652581 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719652281 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719651981 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719651681 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719651381 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719651081 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 26 C |
1719650781 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 25.5 C |
1719650481 | 13.04 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 25.5 C |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)