This is the latest recevied telemetry packets stored in our database for station/object DK1IZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782509206 | 29.7 deg C | 53.2 % | 0 | 0 | 0 |
| 1782508304 | 29.7 deg C | 53.4 % | 0 | 0 | 0 |
| 1782507404 | 29.8 deg C | 53.6 % | 0 | 0 | 0 |
| 1782506502 | 29.7 deg C | 53.9 % | 0 | 0 | 0 |
| 1782505600 | 29.8 deg C | 54.2 % | 0 | 0 | 0 |
| 1782504696 | 29.8 deg C | 54.5 % | 0 | 0 | 0 |
| 1782503797 | 29.7 deg C | 55 % | 0 | 0 | 0 |
| 1782502897 | 29.6 deg C | 55.8 % | 0 | 0 | 0 |
| 1782501986 | 29.4 deg C | 56.4 % | 0 | 0 | 0 |
| 1782501083 | 29.5 deg C | 56.4 % | 0 | 0 | 0 |
| 1782500184 | 29.5 deg C | 56.7 % | 0 | 0 | 0 |
| 1782499281 | 29.5 deg C | 56.6 % | 0 | 0 | 0 |
| 1782498386 | 29.7 deg C | 56.1 % | 0 | 0 | 0 |
| 1782497490 | 29.5 deg C | 56.7 % | 0 | 0 | 0 |
| 1782496592 | 29.5 deg C | 56.1 % | 0 | 0 | 0 |
| 1782495692 | 29.7 deg C | 54.9 % | 0 | 0 | 0 |
| 1782494787 | 29.5 deg C | 55.5 % | 0 | 0 | 0 |
| 1782493890 | 29.3 deg C | 55.5 % | 0 | 0 | 0 |
| 1782492992 | 29.3 deg C | 55.3 % | 0 | 0 | 0 |
| 1782492097 | 29.3 deg C | 55 % | 0 | 0 | 0 |
| 1782491190 | 29.3 deg C | 54.8 % | 0 | 0 | 0 |
| 1782489387 | 31.1 deg C | 50.2 % | 0 | 0 | 0 |
| 1782488482 | 31 deg C | 50.3 % | 0 | 0 | 0 |
| 1782487577 | 30.9 deg C | 50.7 % | 0 | 0 | 0 |
| 1782486681 | 30.6 deg C | 51.5 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)