APRS Track Direct

My position About ☰

reset

DB0SLF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0SLF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1758187611	13.05 Volt	750 Pkt	150 Pkt	68 Pcnt	16.5 C
1758187610	13.05 Volt	750 Pkt	150 Pkt	68 Pcnt	16.5 C
1758187012	13.05 Volt	700 Pkt	140 Pkt	67 Pcnt	17 C
1758187010	13.05 Volt	700 Pkt	140 Pkt	67 Pcnt	17 C
1758186411	13.05 Volt	680 Pkt	140 Pkt	66 Pcnt	16.5 C
1758186410	13.05 Volt	680 Pkt	140 Pkt	66 Pcnt	16.5 C
1758185812	13.05 Volt	630 Pkt	130 Pkt	66 Pcnt	16.5 C
1758185810	13.05 Volt	630 Pkt	130 Pkt	66 Pcnt	16.5 C
1758185212	12.98 Volt	590 Pkt	140 Pkt	66 Pcnt	16.5 C
1758185210	12.98 Volt	590 Pkt	140 Pkt	66 Pcnt	16.5 C
1758184613	13.05 Volt	570 Pkt	130 Pkt	68 Pcnt	16.5 C
1758184610	13.05 Volt	570 Pkt	130 Pkt	68 Pcnt	16.5 C
1758184011	13.05 Volt	560 Pkt	140 Pkt	71 Pcnt	16.5 C
1758184010	13.05 Volt	560 Pkt	140 Pkt	71 Pcnt	16.5 C
1758183412	13.05 Volt	540 Pkt	130 Pkt	71 Pcnt	16.5 C
1758183410	13.05 Volt	540 Pkt	130 Pkt	71 Pcnt	16.5 C
1758182813	12.9 Volt	540 Pkt	140 Pkt	72 Pcnt	16.5 C
1758182810	12.9 Volt	540 Pkt	140 Pkt	72 Pcnt	16.5 C
1758182212	13.05 Volt	570 Pkt	140 Pkt	76 Pcnt	16.5 C
1758182210	13.05 Volt	570 Pkt	140 Pkt	76 Pcnt	16.5 C
1758181612	13.05 Volt	610 Pkt	160 Pkt	77 Pcnt	16.5 C
1758181610	13.05 Volt	610 Pkt	160 Pkt	77 Pcnt	16.5 C
1758181012	12.98 Volt	610 Pkt	160 Pkt	77 Pcnt	16.5 C
1758181010	12.98 Volt	610 Pkt	160 Pkt	77 Pcnt	16.5 C
1758180412	13.05 Volt	650 Pkt	180 Pkt	78 Pcnt	16.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)