This is the latest recevied telemetry packets stored in our database for station/object OROTAC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1770164081 | 5 | 26.1 C | 3.67 V | 40 M | 0 |
| 1770163921 | 5 | 26.2 C | 3.66 V | 30 M | 0 |
| 1770163761 | 6 | 26.3 C | 3.65 V | 30 M | 0 |
| 1770163601 | 7 | 26.3 C | 3.66 V | 60 M | 0 |
| 1770163441 | 7 | 26.2 C | 3.67 V | 50 M | 0 |
| 1770163281 | 6 | 26.3 C | 3.67 V | 40 M | 0 |
| 1770163121 | 7 | 26.3 C | 3.67 V | 40 M | 0 |
| 1770162961 | 7 | 26.3 C | 3.67 V | 30 M | 0 |
| 1770162801 | 8 | 26.4 C | 3.67 V | 0 M | 0 |
| 1770162641 | 6 | 26.5 C | 3.67 V | 60 M | 0 |
| 1770162481 | 8 | 26.5 C | 3.67 V | 50 M | 0 |
| 1770162321 | 8 | 26.5 C | 3.67 V | 50 M | 0 |
| 1770162161 | 6 | 26.5 C | 3.67 V | 40 M | 0 |
| 1770162001 | 6 | 26.6 C | 3.67 V | 40 M | 0 |
| 1770161841 | 7 | 26.6 C | 3.67 V | 20 M | 0 |
| 1770161681 | 6 | 26.6 C | 3.67 V | 40 M | 0 |
| 1770161521 | 9 | 26.7 C | 3.67 V | 20 M | 0 |
| 1770161361 | 9 | 26.7 C | 3.68 V | 40 M | 0 |
| 1770161201 | 5 | 26.7 C | 3.67 V | 10 M | 0 |
| 1770161041 | 7 | 26.8 C | 3.68 V | 30 M | 0 |
| 1770160881 | 10 | 26.8 C | 3.67 V | 30 M | 0 |
| 1770160721 | 10 | 26.9 C | 3.68 V | 20 M | 0 |
| 1770160561 | 8 | 27 C | 3.68 V | 20 M | 0 |
| 1770160401 | 7 | 27.1 C | 3.67 V | 20 M | 0 |
| 1770160241 | 8 | 27.1 C | 3.68 V | 20 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)