APRS Track Direct

My position About ☰

reset

YC1IVW-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC1IVW-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1778066066	114 Pkt	15 Pkt	7 Pkt	-61 dBm	15.22 V
1778065120	84 Pkt	6 Pkt	6 Pkt	-60 dBm	15.32 V
1778064183	105 Pkt	3 Pkt	12 Pkt	-62 dBm	15.44 V
1778063241	4 Pkt	0 Pkt	0 Pkt	-61 dBm	15.44 V
1778062642	103 Pkt	11 Pkt	7 Pkt	-63 dBm	15.42 V
1778061702	31 Pkt	6 Pkt	2 Pkt	-62 dBm	15.32 V
1778060774	32 Pkt	10 Pkt	6 Pkt	-62 dBm	15.44 V
1778059844	21 Pkt	2 Pkt	6 Pkt	-63 dBm	15.44 V
1778058920	0 Pkt	0 Pkt	1 Pkt	-64 dBm	15.44 V
1778058184	18 Pkt	7 Pkt	15 Pkt	-62 dBm	15.46 V
1778057257	25 Pkt	4 Pkt	2 Pkt	-62 dBm	15.44 V
1778056329	0 Pkt	0 Pkt	0 Pkt	-63 dBm	15.22 V
1778055552	21 Pkt	9 Pkt	8 Pkt	-63 dBm	15.44 V
1778054626	30 Pkt	12 Pkt	3 Pkt	-64 dBm	15.44 V
1778053698	31 Pkt	8 Pkt	2 Pkt	-64 dBm	15.44 V
1778052770	54 Pkt	12 Pkt	4 Pkt	-65 dBm	15.44 V
1778051832	63 Pkt	11 Pkt	4 Pkt	-63 dBm	15.46 V
1778050898	49 Pkt	8 Pkt	3 Pkt	-63 dBm	14.93 V
1778049966	66 Pkt	3 Pkt	2 Pkt	-63 dBm	15.16 V
1778049031	6 Pkt	0 Pkt	0 Pkt	-62 dBm	15.36 V
1778048692	49 Pkt	9 Pkt	2 Pkt	-63 dBm	15.46 V
1778047763	25 Pkt	8 Pkt	1 Pkt	-63 dBm	15.46 V
1778046835	32 Pkt	10 Pkt	5 Pkt	-65 dBm	15.46 V
1778045908	32 Pkt	10 Pkt	5 Pkt	-65 dBm	15.46 V
1778044981	33 Pkt	11 Pkt	5 Pkt	-64 dBm	15.44 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)