This is the latest recevied telemetry packets stored in our database for station/object SP7TWA-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770126076 | 223 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770125172 | 222 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770124268 | 221 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770123364 | 220 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770122460 | 219 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770121556 | 218 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770120652 | 217 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770119748 | 216 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770118844 | 215 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770117940 | 214 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770117036 | 213 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770116132 | 212 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770115324 | 211 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770114420 | 210 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770113516 | 209 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770112612 | 208 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770111708 | 207 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770110804 | 206 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770109900 | 205 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770108996 | 204 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770108092 | 203 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770107188 | 202 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770106284 | 201 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770105380 | 200 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1770104476 | 199 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)