APRS Track Direct

My position About ☰

reset

OK1COM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1COM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1770106588	14.03 Volt	420 Pkt	140 Pkt	79 Pcnt
1770106289	14.03 Volt	430 Pkt	140 Pkt	80 Pcnt
1770106288	14.03 Volt	430 Pkt	140 Pkt	80 Pcnt
1770105988	14.03 Volt	440 Pkt	140 Pkt	80 Pcnt
1770105688	14.03 Volt	450 Pkt	140 Pkt	80 Pcnt
1770105389	14.03 Volt	440 Pkt	140 Pkt	80 Pcnt
1770105388	14.03 Volt	440 Pkt	140 Pkt	80 Pcnt
1770105088	14.03 Volt	460 Pkt	150 Pkt	80 Pcnt
1770104788	14.03 Volt	470 Pkt	150 Pkt	79 Pcnt
1770104489	14.03 Volt	460 Pkt	150 Pkt	80 Pcnt
1770104488	14.03 Volt	460 Pkt	150 Pkt	80 Pcnt
1770104188	14.03 Volt	450 Pkt	140 Pkt	79 Pcnt
1770103888	14.03 Volt	450 Pkt	140 Pkt	80 Pcnt
1770103589	14.03 Volt	440 Pkt	140 Pkt	80 Pcnt
1770103588	14.03 Volt	440 Pkt	140 Pkt	80 Pcnt
1770103288	13.95 Volt	450 Pkt	140 Pkt	80 Pcnt
1770102988	14.03 Volt	450 Pkt	140 Pkt	80 Pcnt
1770102688	14.03 Volt	450 Pkt	140 Pkt	81 Pcnt
1770102388	14.03 Volt	450 Pkt	150 Pkt	80 Pcnt
1770102088	14.03 Volt	440 Pkt	140 Pkt	80 Pcnt
1770101790	14.03 Volt	440 Pkt	150 Pkt	81 Pcnt
1770101788	14.03 Volt	440 Pkt	150 Pkt	81 Pcnt
1770101488	14.03 Volt	440 Pkt	150 Pkt	81 Pcnt
1770101188	14.03 Volt	440 Pkt	150 Pkt	82 Pcnt
1770100889	14.03 Volt	450 Pkt	160 Pkt	82 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)