APRS Track Direct

My position About ☰

reset

ZS1BR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ZS1BR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	CPUTemp*	Load*	Voltage*	Light*
1770458031	49.39 DegC	0.45 Load	13.03 Volts	45 Percent
1770457436	50.46 DegC	0.42 Load	13.07 Volts	42 Percent
1770457435	51 DegC	0.45 Load	13.08 Volts	43 Percent
1770456835	49.39 DegC	0.34 Load	13.03 Volts	43 Percent
1770456832	49.93 DegC	0.34 Load	13.05 Volts	43 Percent
1770456235	49.39 DegC	0.37 Load	13.05 Volts	37 Percent
1770456231	49.39 DegC	0.37 Load	13.07 Volts	38 Percent
1770455633	48.31 DegC	0.46 Load	13.1 Volts	40 Percent
1770455631	48.85 DegC	0.46 Load	13.07 Volts	40 Percent
1770455034	48.31 DegC	0.38 Load	13.07 Volts	41 Percent
1770455032	48.31 DegC	0.38 Load	13.07 Volts	42 Percent
1770454432	49.39 DegC	0.46 Load	13.07 Volts	41 Percent
1770453835	50.46 DegC	0.47 Load	13.08 Volts	40 Percent
1770453232	49.93 DegC	0.36 Load	13.07 Volts	32 Percent
1770452634	48.31 DegC	0.36 Load	13.08 Volts	35 Percent
1770452632	48.31 DegC	0.36 Load	13.1 Volts	33 Percent
1770452032	49.39 DegC	0.36 Load	13.05 Volts	38 Percent
1770451431	48.31 DegC	0.47 Load	13.1 Volts	34 Percent
1770450831	48.31 DegC	0.32 Load	13.03 Volts	30 Percent
1770450235	48.31 DegC	0.35 Load	13.07 Volts	29 Percent
1770449631	47.77 DegC	0.35 Load	13.07 Volts	27 Percent
1770449031	47.77 DegC	0.43 Load	13.03 Volts	24 Percent
1770448432	47.77 DegC	0.5 Load	13.05 Volts	28 Percent
1770447832	47.24 DegC	0.5 Load	13.08 Volts	28 Percent
1770447232	46.7 DegC	0.43 Load	13.05 Volts	24 Percent

*Used Equation Coefficients:

CPUTemp: 0, 0.001, 0

Load: 0, 0.001, 0

Voltage: 0, 0.01, 0

Light: 0, 1, 0

Vx1: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)