APRS Track Direct

My position About ☰

reset

AC6SL-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AC6SL-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1766297523	0.04 Rx Erlang	0 Tx Erlang	39 count/10m	14 count/10m	0 count/10m
1766296323	0.05 Rx Erlang	0 Tx Erlang	45 count/10m	14 count/10m	0 count/10m
1766295123	0.04 Rx Erlang	0 Tx Erlang	33 count/10m	4 count/10m	0 count/10m
1766293923	0.04 Rx Erlang	0 Tx Erlang	41 count/10m	7 count/10m	0 count/10m
1766292723	0.05 Rx Erlang	0 Tx Erlang	52 count/10m	7 count/10m	0 count/10m
1766291523	0.04 Rx Erlang	0 Tx Erlang	38 count/10m	8 count/10m	0 count/10m
1766290323	0.03 Rx Erlang	0 Tx Erlang	34 count/10m	4 count/10m	0 count/10m
1766289123	0.04 Rx Erlang	0 Tx Erlang	36 count/10m	5 count/10m	0 count/10m
1766287923	0.04 Rx Erlang	0 Tx Erlang	39 count/10m	9 count/10m	0 count/10m
1766286723	0.04 Rx Erlang	0 Tx Erlang	33 count/10m	3 count/10m	0 count/10m
1766285523	0.04 Rx Erlang	0 Tx Erlang	36 count/10m	5 count/10m	0 count/10m
1766284323	0.04 Rx Erlang	0 Tx Erlang	43 count/10m	7 count/10m	0 count/10m
1766283123	0.04 Rx Erlang	0 Tx Erlang	39 count/10m	6 count/10m	0 count/10m
1766281923	0.04 Rx Erlang	0 Tx Erlang	46 count/10m	10 count/10m	0 count/10m
1766280723	0.04 Rx Erlang	0 Tx Erlang	47 count/10m	7 count/10m	0 count/10m
1766279523	0.04 Rx Erlang	0 Tx Erlang	42 count/10m	6 count/10m	0 count/10m
1766278323	0.05 Rx Erlang	0 Tx Erlang	41 count/10m	8 count/10m	0 count/10m
1766277123	0.03 Rx Erlang	0 Tx Erlang	32 count/10m	5 count/10m	0 count/10m
1766275923	0.04 Rx Erlang	0 Tx Erlang	38 count/10m	6 count/10m	0 count/10m
1766274723	0.03 Rx Erlang	0 Tx Erlang	31 count/10m	7 count/10m	0 count/10m
1766273523	0.04 Rx Erlang	0 Tx Erlang	40 count/10m	7 count/10m	0 count/10m
1766272323	0.05 Rx Erlang	0 Tx Erlang	47 count/10m	6 count/10m	0 count/10m
1766271123	0.06 Rx Erlang	0 Tx Erlang	60 count/10m	8 count/10m	0 count/10m
1766269923	0.04 Rx Erlang	0 Tx Erlang	51 count/10m	6 count/10m	0 count/10m
1766268723	0.04 Rx Erlang	0 Tx Erlang	44 count/10m	4 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)