This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782477379 | 371 Count | 572 Count | 359 Count | 4.11 VDC | 0 VDC |
| 1782476478 | 344 Count | 519 Count | 333 Count | 4.11 VDC | 0 VDC |
| 1782475577 | 312 Count | 469 Count | 302 Count | 4.11 VDC | 0 VDC |
| 1782474697 | 278 Count | 421 Count | 273 Count | 4.1 VDC | 0 VDC |
| 1782473796 | 237 Count | 354 Count | 233 Count | 4.11 VDC | 0 VDC |
| 1782472895 | 192 Count | 280 Count | 189 Count | 4.1 VDC | 0 VDC |
| 1782471994 | 145 Count | 212 Count | 143 Count | 4.11 VDC | 0 VDC |
| 1782471093 | 98 Count | 141 Count | 97 Count | 4.11 VDC | 0 VDC |
| 1782470192 | 55 Count | 82 Count | 55 Count | 4.11 VDC | 0 VDC |
| 1782469291 | 639 Count | 1035 Count | 624 Count | 4.11 VDC | 0 VDC |
| 1782468390 | 601 Count | 975 Count | 587 Count | 4.11 VDC | 0 VDC |
| 1782467489 | 553 Count | 908 Count | 540 Count | 4.11 VDC | 0 VDC |
| 1782466588 | 511 Count | 854 Count | 500 Count | 4.11 VDC | 0 VDC |
| 1782465687 | 475 Count | 805 Count | 465 Count | 4.1 VDC | 0 VDC |
| 1782464786 | 436 Count | 745 Count | 427 Count | 4.11 VDC | 0 VDC |
| 1782463885 | 387 Count | 669 Count | 379 Count | 4.11 VDC | 0 VDC |
| 1782462985 | 357 Count | 605 Count | 350 Count | 4.11 VDC | 0 VDC |
| 1782462084 | 307 Count | 521 Count | 301 Count | 4.11 VDC | 0 VDC |
| 1782461183 | 264 Count | 451 Count | 259 Count | 4.11 VDC | 0 VDC |
| 1782460282 | 225 Count | 390 Count | 221 Count | 4.11 VDC | 0 VDC |
| 1782459381 | 183 Count | 301 Count | 180 Count | 4.11 VDC | 0 VDC |
| 1782458480 | 126 Count | 218 Count | 124 Count | 4.11 VDC | 0 VDC |
| 1782457580 | 84 Count | 149 Count | 83 Count | 4.11 VDC | 0 VDC |
| 1782456679 | 35 Count | 63 Count | 35 Count | 4.11 VDC | 0 VDC |
| 1782455778 | 684 Count | 1021 Count | 664 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)