APRS Track Direct

My position About ☰

reset

XE2KI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2KI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1778060215	0.33 Load	32.01 DegC	37 Mb	654 Pkt	205 Pkt
1778059914	0.42 Load	32.55 DegC	30 Mb	683 Pkt	198 Pkt
1778059615	0.39 Load	33.09 DegC	36 Mb	646 Pkt	203 Pkt
1778059315	0.41 Load	32.55 DegC	30 Mb	677 Pkt	203 Pkt
1778059015	0.41 Load	32.55 DegC	32 Mb	649 Pkt	206 Pkt
1778058714	0.4 Load	33.09 DegC	32 Mb	677 Pkt	199 Pkt
1778058415	0.45 Load	33.09 DegC	30 Mb	654 Pkt	209 Pkt
1778058115	0.34 Load	32.55 DegC	30 Mb	671 Pkt	199 Pkt
1778057815	0.29 Load	33.09 DegC	37 Mb	659 Pkt	203 Pkt
1778057515	0.31 Load	33.63 DegC	36 Mb	666 Pkt	201 Pkt
1778057215	0.38 Load	32.55 DegC	36 Mb	657 Pkt	207 Pkt
1778056915	0.37 Load	32.55 DegC	31 Mb	678 Pkt	208 Pkt
1778056615	0.39 Load	33.09 DegC	30 Mb	654 Pkt	200 Pkt
1778056315	0.38 Load	33.63 DegC	30 Mb	672 Pkt	204 Pkt
1778056015	0.35 Load	32.55 DegC	32 Mb	653 Pkt	197 Pkt
1778055715	0.36 Load	32.55 DegC	37 Mb	671 Pkt	210 Pkt
1778055414	0.43 Load	33.63 DegC	37 Mb	666 Pkt	206 Pkt
1778055115	0.38 Load	32.55 DegC	37 Mb	669 Pkt	208 Pkt
1778054814	0.47 Load	32.55 DegC	39 Mb	665 Pkt	202 Pkt
1778054515	0.36 Load	32.55 DegC	31 Mb	661 Pkt	203 Pkt
1778054214	0.35 Load	33.63 DegC	32 Mb	676 Pkt	203 Pkt
1778053915	0.25 Load	32.55 DegC	38 Mb	664 Pkt	198 Pkt
1778053614	0.3 Load	33.09 DegC	37 Mb	660 Pkt	205 Pkt
1778053315	0.31 Load	33.63 DegC	38 Mb	662 Pkt	199 Pkt
1778053015	0.3 Load	32.55 DegC	32 Mb	669 Pkt	207 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)