This is the latest recevied telemetry packets stored in our database for station/object AA5SG-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774656084 | 495 | 625 | 0 | 0 | 0 |
| 1774642619 | 477 | 639 | 0 | 0 | 0 |
| 1774642367 | 477 | 637 | 0 | 0 | 0 |
| 1774642183 | 493 | 633 | 0 | 0 | 0 |
| 1774642116 | 495 | 632 | 0 | 0 | 0 |
| 1774641069 | 479 | 637 | 0 | 0 | 0 |
| 1774640942 | 481 | 635 | 0 | 0 | 0 |
| 1774640912 | 484 | 634 | 0 | 0 | 0 |
| 1774640888 | 479 | 634 | 0 | 0 | 0 |
| 1774640832 | 476 | 633 | 0 | 0 | 0 |
| 1774640648 | 483 | 628 | 0 | 0 | 0 |
| 1774640641 | 480 | 629 | 0 | 0 | 0 |
| 1774634499 | 479 | 627 | 0 | 0 | 0 |
| 1774634494 | 475 | 627 | 0 | 0 | 0 |
| 1774634471 | 478 | 627 | 0 | 0 | 0 |
| 1774634450 | 483 | 627 | 0 | 0 | 0 |
| 1774634354 | 488 | 624 | 0 | 0 | 0 |
| 1774634349 | 489 | 624 | 0 | 0 | 0 |
| 1774634283 | 490 | 624 | 0 | 0 | 0 |
| 1774633707 | 458 | 627 | 0 | 0 | 0 |
| 1774633481 | 483 | 622 | 0 | 0 | 0 |
| 1774633429 | 490 | 621 | 0 | 0 | 0 |
| 1774633375 | 489 | 621 | 0 | 0 | 0 |
| 1774631968 | 483 | 627 | 0 | 0 | 0 |
| 1774631906 | 493 | 627 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)