This is the latest recevied telemetry packets stored in our database for station/object OE3CJB-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1770102391 | 978.1 hPa | 18.8 C deg | 36.8 % | 1007.3 hPa | 0 C deg |
| 1770101664 | 977.7 hPa | 26 C deg | 38.1 % | 1006.2 hPa | 0 C deg |
| 1770100835 | 978 hPa | 24.5 C deg | 39 % | 1006.7 hPa | 0 C deg |
| 1770095387 | 977.4 hPa | 24.4 C deg | 38.9 % | 1006.1 hPa | 0 C deg |
| 1770091756 | 977.3 hPa | 24.3 C deg | 39 % | 1006 hPa | 0 C deg |
| 1770086315 | 977.2 hPa | 24 C deg | 39.3 % | 1005.9 hPa | 0 C deg |
| 1770077235 | 977.4 hPa | 24.3 C deg | 39.2 % | 1006.1 hPa | 0 C deg |
| 1770075416 | 977.3 hPa | 24.4 C deg | 39.1 % | 1006 hPa | 0 C deg |
| 1770071786 | 977.5 hPa | 24.5 C deg | 39.2 % | 1006.1 hPa | 0 C deg |
| 1770069975 | 977.2 hPa | 24.5 C deg | 39.2 % | 1005.9 hPa | 0 C deg |
| 1770066340 | 977 hPa | 24.5 C deg | 39.3 % | 1005.6 hPa | 0 C deg |
| 1770064535 | 976.9 hPa | 24.5 C deg | 39.4 % | 1005.5 hPa | 0 C deg |
| 1770057286 | 976.6 hPa | 24.6 C deg | 39 % | 1005.2 hPa | 0 C deg |
| 1770051445 | 976.4 hPa | 24.8 C deg | 38.8 % | 1005 hPa | 0 C deg |
| 1770047082 | 976.6 hPa | 25 C deg | 38.6 % | 1005.2 hPa | 0 C deg |
| 1770045284 | 976.6 hPa | 25.1 C deg | 38.5 % | 1005.2 hPa | 0 C deg |
| 1770043482 | 976.9 hPa | 25.1 C deg | 38.5 % | 1005.5 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)