APRS Track Direct

My position About ☰

reset

OE3MZC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3MZC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Eff1h*	RX10m*	Total*
1786785865	380 Pkt	78 Pcnt	44 Pkt	78 Prcnt
1786785565	390 Pkt	78 Pcnt	58 Pkt	78 Prcnt
1786785264	410 Pkt	79 Pcnt	55 Pkt	78 Prcnt
1786784964	410 Pkt	79 Pcnt	65 Pkt	78 Prcnt
1786784665	410 Pkt	79 Pcnt	77 Pkt	78 Prcnt
1786784664	410 Pkt	79 Pcnt	77 Pkt	78 Prcnt
1786784364	410 Pkt	79 Pcnt	61 Pkt	78 Prcnt
1786784063	420 Pkt	79 Pcnt	54 Pkt	78 Prcnt
1786783763	420 Pkt	79 Pcnt	65 Pkt	78 Prcnt
1786783463	440 Pkt	80 Pcnt	82 Pkt	78 Prcnt
1786783162	440 Pkt	80 Pcnt	88 Pkt	78 Prcnt
1786782862	440 Pkt	80 Pcnt	73 Pkt	78 Prcnt
1786782683	440 Pkt	80 Pcnt	67 Pkt	78 Prcnt
1786782562	440 Pkt	79 Pcnt	57 Pkt	78 Prcnt
1786782261	460 Pkt	79 Pcnt	68 Pkt	78 Prcnt
1786781961	480 Pkt	80 Pcnt	77 Pkt	78 Prcnt
1786781661	480 Pkt	79 Pcnt	61 Pkt	78 Prcnt
1786781361	490 Pkt	78 Pcnt	67 Pkt	78 Prcnt
1786781062	520 Pkt	78 Pcnt	79 Pkt	78 Prcnt
1786780990	520 Pkt	78 Pcnt	76 Pkt	78 Prcnt
1786780760	520 Pkt	78 Pcnt	74 Pkt	78 Prcnt
1786780701	520 Pkt	78 Pcnt	76 Pkt	78 Prcnt
1786780460	530 Pkt	77 Pcnt	79 Pkt	78 Prcnt
1786780159	530 Pkt	77 Pcnt	85 Pkt	78 Prcnt
1786779860	530 Pkt	77 Pcnt	78 Pkt	78 Prcnt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

RX10m: 0, 1, 0

Total: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)