This is the latest recevied telemetry packets stored in our database for station/object DL1MX-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1766179564 | 0 hPa | 0 C deg | 76.3 % | 0 hPa | 10.2 C deg |
| 1766177746 | 0 hPa | 0 C deg | 76.8 % | 0 hPa | 10.1 C deg |
| 1766175933 | 0 hPa | 0 C deg | 76 % | 0 hPa | 10.2 C deg |
| 1766174118 | 0 hPa | 0 C deg | 76 % | 0 hPa | 10.3 C deg |
| 1766172302 | 0 hPa | 0 C deg | 76 % | 0 hPa | 10.3 C deg |
| 1766170487 | 0 hPa | 0 C deg | 75.9 % | 0 hPa | 10.3 C deg |
| 1766168669 | 0 hPa | 0 C deg | 76.5 % | 0 hPa | 10.2 C deg |
| 1766166854 | 0 hPa | 0 C deg | 76.1 % | 0 hPa | 10.3 C deg |
| 1766165039 | 0 hPa | 0 C deg | 76.2 % | 0 hPa | 10.3 C deg |
| 1766163223 | 0 hPa | 0 C deg | 76.3 % | 0 hPa | 10.3 C deg |
| 1766146887 | 0 hPa | 0 C deg | 71.9 % | 0 hPa | 10.1 C deg |
| 1766145072 | 0 hPa | 0 C deg | 71.6 % | 0 hPa | 10 C deg |
| 1766143257 | 0 hPa | 0 C deg | 71.4 % | 0 hPa | 10.1 C deg |
| 1766141442 | 0 hPa | 0 C deg | 71.3 % | 0 hPa | 10 C deg |
| 1766139628 | 0 hPa | 0 C deg | 71.4 % | 0 hPa | 9.8 C deg |
| 1766137813 | 0 hPa | 0 C deg | 71.5 % | 0 hPa | 9.6 C deg |
| 1766135997 | 0 hPa | 0 C deg | 71.5 % | 0 hPa | 9.4 C deg |
| 1766134181 | 0 hPa | 0 C deg | 71.7 % | 0 hPa | 9.1 C deg |
| 1766132366 | 0 hPa | 0 C deg | 72.2 % | 0 hPa | 8.7 C deg |
| 1766130551 | 0 hPa | 0 C deg | 72.5 % | 0 hPa | 8.4 C deg |
| 1766128739 | 0 hPa | 0 C deg | 72.3 % | 0 hPa | 8.3 C deg |
| 1766126924 | 0 hPa | 0 C deg | 72.4 % | 0 hPa | 8.3 C deg |
| 1766123325 | 0 hPa | 0 C deg | 73.4 % | 0 hPa | 8.1 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)